If ubuntu does not automatically detect the printer driver, perform the following steps:
1. Download the driver here
2. Ekstrak file cnijfilter-mp250series-3.20-1-i386-deb.tar.gz, result folder ekstract will get two package file .deb i.e. example : Canon MP250 series driver. here the image
3. Install both the package. The way Just click that package .deb.
4. Turn on printer canon mp258… ubuntu automatically will detect the printer, Try check in System –>administration–> Printing
5. Do the print test. you will see in setting canon printer.
Install Scanner
Turn off the printer first
1. First download the driver here
2. Same as when installing a printer. Extract the package and install.
3. Then open a terminal and type command :
sudo apt-get install libusb-dev build-essential
4. And then type this command in terminal :
sudo apt-get install git-coreand
git clone git://git.debian.org/sane/sane-backends.gitwait for minute while proccess running...
5. If completed, then the home folders will have folder sane-backends. Go to forlder is:
cd sane-backends6. Now do its package configuration. by typing:
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
7. For compile the configuration, type this command in terminal :
makewait for a while ...
8. Then type instal to install scanner :
sudo make install
9. scanners have been installed. but still there is one more. setting permissions before ... do I open gedit from the terminal.
geditthen copy this writing below:
SUBSYSTEM==”usb”, ENV{DEVTYPE}==”usb_device”, MODE:=”0666″
SUBSYSTEM==”usb_device”,MODE:=”0666″save in the folder "/etc/udev/rules.d" and rename file to 40-scanner-permissions.rules
10. Try to scann one picture for test.
good luck
Source : http://ab3duh.wordpress.com/
Description: Install canon printer driver in ubuntu Rating: 4.5 Reviewer: Zein Okeh - ItemReviewed: Install canon printer driver in ubuntu
2 komentar:
Great post. And your english is not bad. Can i print Plastic cards by any laser printer?
thanks
Post a Comment
Sorry if my english is bad